top of page

/  How to buy an investment property

Property investment guide

How to buy an investment property in NZ

How buying an investment property in New Zealand works, step by step, from deposit rules and usable equity through to settlement and tax.

General information, not financial advice

9 min read

LVR settings current from 1 December 2025

DSC01262.jpg
DSC00874.jpg

Written by:

Reviewed by:

Remy Sandoy, Investment Finance Advisor, is a licensed financial adviser and works with clients on investment lending.

Nicole Glover, Mortgage Finance Advisor, checked the LVR thresholds, equity calculations and lending examples in this guide.

Sources: LVR settings from the Reserve Bank of New Zealand, current from 1 December 2025.

Last reviewed: 3 November 2026

Buying an investment property in NZ comes down to three things: a deposit, a bank that will lend the rest, and income to cover the costs.

Deposit. On a qualifying new build, banks often look for around 20%, because new builds are exempt from the Reserve Bank’s investor lending limits. On an existing property, it’s usually around 30%. If you already own a home, the deposit can come from the equity in your home rather than savings.

Lending. The bank tests your income against all your debt, including your home loan, at a higher interest rate than you’d actually pay.

Costs. If the rent doesn’t cover the mortgage, rates, insurance and maintenance, the gap comes from your income.

Here’s how to buy an investment property in NZ, step by step:

STEP 1

Check whether you can afford an investment property

Reserve Bank rules limit investor lending above 70% of a property’s value. This is the loan-to-value ratio (LVR) rule. That’s why an existing investment property usually needs a deposit of around 30%. Since 1 December 2025, banks have been able to make up to 10% of their new investor lending above that line, and each bank decides who gets those loans (RBNZ). Qualifying new builds are exempt, so the deposit is set by each bank’s own policy, often around 20%.

How much deposit you need

Whether you can afford an investment property depends on how a bank assesses you. It tests three things: your deposit or equity, your income, and your total debt against your income. Whichever one is tightest usually sets the limit.

Qualifying new build

~20%

Deposit, set by each bank’s own policy.

Existing property

~30%

Deposit, under the LVR rule.

Investor DTI limit

7×

Total debt to income, above which lending is limited.

Source: RBNZ . Individual lenders apply their own criteria.

Income

The bank tests your repayments at a higher interest rate than you’d actually pay. It also counts only part of the expected rent, to allow for vacancy and costs. Each bank sets its own test rate and rent discount. Your salary, living costs, existing mortgage and other debts all go into the calculation. Credit cards are usually counted at their full limit.

Debt-to-income

Since 1 July 2024, the Reserve Bank has limited lending to investors whose total debt is more than seven times their income. This is the debt-to-income (DTI) rule. Banks can make up to 20% of their new investor lending above that level (RBNZ). Total debt includes your home loan and the top-up used for the deposit. If you’re buying with equity, this can be the test that sets the limit. Qualifying new builds are exempt (RBNZ).

The costs a bank doesn’t plan for you

A loan approval shows you meet the bank’s criteria. It doesn’t show what the property will cost you each month. Plan for:

repayments on the equity top-up

any gap between the rent and the investment loan repayments

council rates and landlord insurance

maintenance, and weeks with no tenant

Many investors keep a cash buffer for these, separate from the deposit. That way, one vacancy or repair doesn’t force a decision.

STEP 2

Work out your usable equity

Usable equity is the share of your home’s value a bank will lend against, minus what you still owe on the mortgage. It’s always less than your total equity. When buying an investment property with equity, it’s what funds the deposit.

a

Revaluation. The bank values your home. The figure it lends against is its own valuation, not an agent’s appraisal or the council rating value.

b

Usable equity. The bank lends up to a set share of that value, then subtracts your mortgage. See how home equity works for the full calculation. 

c

Top-up or new loan. The equity is released as a top-up on your mortgage or a separate loan secured on your home, and becomes the deposit. A separate loan keeps the rental borrowing easy to trace at tax time. 

d

The second loan. The rest of the price is borrowed against the new property. The bank often takes security over both properties. 

Cash savings, or a mix of cash and equity, work too. Either way, the income and debt-to-income tests still apply.

Worked example: buying an investment property with equity

STEP

FIGURE

Home value (bank valuation)
$1,000,000
Current mortgage
$400,000
Maximum lending on the home (80%)
$800,000
Usable equity
$400,000
Deposit on an $800,000 qualifying new build (20%)
$160,000

$1,000,000 × 80% − $400,000 = $400,000 of usable equity, which covers either deposit. The existing property needs $80,000 more, because the deposit rules differ (RBNZ, from 1 December 2025). Whether a bank lends the rest depends on the income and debt-to-income tests.

Illustrative figures only. Individual lenders apply their own criteria.

See how much usable equity your home may have.
Home equity calculator
STEP 3

Get pre-approval for an investment property loan

When purchasing an investment property, pre-approval is the lender’s conditional agreement to lend up to a set amount. It tells you your price range before you start looking, but it isn’t a final loan offer.

​

It usually depends on the property’s valuation and type, insurance, and no change in your circumstances. It also has an expiry date. For an equity purchase, it covers two loans: the equity release on your home and the loan on the rental.

​

Banks treat rental income, new builds and existing lending differently. An adviser can compare lenders, structure the two loans and handle the paperwork. Advisers must tell you how they’re paid (Financial Markets Conduct Act 2013). See our current mortgage rates.

If you’d like a hand working through pre-approval, speak with one of our advisers.
Speak with an adviser
STEP 4

Choose the right investment property

Choosing the property means looking at where it is, who would rent it and what it costs to run. Then there’s the choice between a new build and an existing home.

What to consider when buying an investment property

These are the main things to look for when buying a rental property in NZ:

Location. Where people are moving and working, planned transport and amenities, and how much new housing is being built nearby. Stats NZ population projections and council plans are useful sources. Projections are forecasts, not certainties.

Rental demand. Who would rent the property, and how quickly similar homes nearby let.

Price against rent. Gross yield, the annual rent as a share of the price, is a quick comparison. It’s measured before costs.

Running costs. Rates, insurance, maintenance and, for unit titles, body corporate levies and rules on renting.

Your own position. How the property fits your cash flow, and how hands-on you want to be.

New build or existing property

Qualifying new build
Existing property
Deposit rules
Exempt from LVR restrictions (RBNZ, from 1 December 2025)
Lending above 70% LVR restricted, so around 30% deposit (RBNZ, from 1 December 2025)
Debt-to-income
Exempt from DTI restrictions (RBNZ, from 1 July 2024)
DTI restrictions apply (RBNZ, from 1 July 2024)
Maintenance
Less early maintenance is typical
Depends on age and condition
Healthy Homes
Built to current Building Code, but compliance still has to be confirmed
May need work before tenants move in
Warranties
Building Act 2004 implied warranties, often plus a builder’s guarantee
Implied warranties cover only building work done in the last 10 years
Location and changes
Limited to where developers build, little room to renovate
Wider choice, room to renovate, extend or subdivide
Timing
Off-plan purchases carry completion-date risk
Settles on an agreed date

Neither is the right answer for everyone. The exemptions apply only to qualifying new builds, so confirm with the lender that a property qualifies.

STEP 5

Decide whose name it goes in

How you own the property affects tax, lending and what happens if circumstances change. Decide before you make an offer, because changing it later costs time and money.

Personal name

The simplest option. Income and costs sit in your personal tax.

Joint names

Common for couples. As joint tenants, the survivor inherits the whole property. As tenants in common, each owner holds a set share.

Trust

Separates the property from personal ownership, with set-up costs and ongoing administration.

Company

The property sits in a separate legal entity. Tax treatment varies by company type, and banks may ask for personal guarantees.

Talk to an accountant and a solicitor before you sign anything.

STEP 6

Make an offer and do your due diligence

Purchasing an investment property usually starts with a conditional offer. This gives you time to confirm finance and check the property before you’re committed. Once every condition in the sale and purchase agreement is met, the agreement goes unconditional, and you’re committed to buy. The deposit paid to the seller is set in the contract and is separate from your bank’s deposit requirement.

​

Checks to complete before going unconditional when buying a rental property:

LIM report. The council’s record of consents, zoning and known issues.

Title. Your solicitor checks ownership and any covenants or easements.

Builder’s report.  Condition, moisture, structure and any unconsented work.

Healthy Homes. What the property meets now and what work it needs.

Code compliance certificate. For new builds, issued before settlement.

Body corporate records.   For unit titles, the disclosure statement, levies and planned maintenance.

For off-plan new builds, your solicitor should also check how your deposit is held and the sunset clause. That’s the date the contract can be cancelled if the build isn’t finished.

Step 7

Settle, then set up for tax

On settlement day, the loans are paid out and the property becomes yours. Insurance must be in place by then. If the deposit comes from equity, the top-up on your home has to be ready too. From then on, the rental income and costs sit in your tax return. Buying a rental property changes your tax position in four main ways:

Interest. Since 1 April 2025, investors can claim 100% of eligible mortgage interest on residential rentals (IRD).

Bright-line test. If you sell a residential property within two years, the profit is usually taxed. This applies to sales on or after 1 July 2024, unless an exclusion applies (IRD).

Depreciation. Buildings aren’t depreciable, but chattels such as carpets, heat pumps and appliances generally are (IRD).

Losses. If costs exceed rent, the loss can’t reduce tax on your salary. It carries forward against future rental income instead (IRD).

What changes once you own two properties

Buying an investment property in NZ with equity links your two properties. The lending and the security behind it tie them together.

Shared security. If you refinance or sell one property, the bank reassesses the lending against what’s left. It may ask for part of the sale proceeds. Some banks will let each property secure its own loan. Ask at the start.

Interest rates. Repayments on the combined debt change as each fixed term ends.

Property values. Usable equity is worked out from the bank’s valuation. If either property’s value falls, the equity available falls with it, and the bank may not lend against it again.

REALITY CHECK
Using equity doesn’t just buy a second property. It links the two. What happens to one shows up in the lending on both.

How to buy an investment property: the seven steps at a glance

Step
What happens
Who helps
1. Check the numbers
Understand how a bank tests your deposit, income and debt
Adviser
2. Usable equity
The bank values your home and sets the equity available
Adviser, bank
3. Pre-approval
A lender agrees in principle how much it will lend
Adviser, bank
4. Choose the property
Assess location, demand and costs, then new build or existing
Adviser
5. Ownership structure
Decide whose name the property goes in
Accountant, solicitor
6. Offer and due diligence
Make a conditional offer and complete the checks
Solicitor, building inspector
7. Settle and tax
Take ownership and set up for tax
Solicitor, bank, accountant
Your next step

Start with the numbers you already have.

If you’re working out how to begin property investment, use our home equity calculator to see how much usable equity your home may have. Then talk it through with one of our advisers. No pressure, and “not yet” is a fine answer. For the wider picture, read the full guide.

Buying an investment property FAQs

  • For a qualifying new build, banks often look for a deposit of around 20%. That’s because new builds are exempt from the Reserve Bank’s investor lending limits. For an existing property, it’s usually around 30%, because Reserve Bank rules restrict investor lending above 70% of a property’s value (RBNZ). The deposit can come from home equity rather than cash, and the bank also tests your income and total debt.

  • Banks accept equity in a home you already own in place of a cash deposit. The bank releases usable equity as a top-up or separate loan, and that funds the deposit. The income and debt-to-income tests still apply.

  • Neither is better for everyone. Qualifying new builds need a lower deposit, are exempt from the DTI restrictions and usually need less early maintenance. Existing properties offer more choice and room to renovate, with a higher deposit and more upkeep.

  • Start before you look at properties. Find out how a bank would assess you, how much usable equity you have, and what a property would cost to hold.

  • Pre-approval can take days or weeks. Once an offer is accepted, there’s a conditional period for finance and due diligence, then settlement on an agreed date. Off-plan new builds can take months or longer to complete.

Disclaimer

This page is general information only. It isn't financial advice, and it doesn't take account of your goals, financial situation or needs. For advice on your own situation, speak with one of our advisers.

​

We've taken real care to get this right, but lending rules and tax settings change, and the odd detail can slip through. Check the current position, and talk to a financial adviser, solicitor or accountant before making any investment decision. See our disclosure information.

Keep reading

Where this sits in the bigger picture

Main guide

Property investment in NZ 

How strategy, lending, structures and readiness fit together.

Guide

How home equity works 

The full usable equity calculation, and how the lending is arranged.

Rates

Current mortgage rates 

Rates from New Zealand lenders, in one place.

bottom of page